Unscrew the end cap of the pole and pull the SlabPro out from inside, using the slots snap the SlabPro onto the head. It should be attached to the rock side prong and pointing away from the hook.

Once the SlabPro is in place. Put the rope into the head as you normally would to clip a draw. Extend the pole towards the draw and position the slab pro behind the draw. Frome here rotate the pole slightly so the SlabPro pulls the draw off the wall. You can then easily fit the rope loop around the carabiner and pull the lower strand to clip.

Note - The Spire Clip must be fully collapsed to access the SlabPro